A complete polyurethane transmission bushing kit for the FC3S.
This kit includes:
Y-bracket bushings (2)
Center bushing with flange washer
Center bushing stop washer
Hardware
These Y-bracket bushings are a fully isolated design, not a cheap through bolt design like other mounts on the market. With our design, the studs are mechanically locked to the polyurethane, and each end floats separately - this allows the poly to perform properly, and absorb forces applied in all directions.
The center bushing and stop washer makes full contact with the transmission crossmember, unlike OEM.
Offered in 70A, 80A or 90A hardness! These come standard in black color.
Based on our testing, we recommend 70A for street cars or drifting and track use up to around 300whp. 80A is a good step up for higher power cars, but you will start to notice an increase in NVH when in higher gears during higher speeds like cruising on the highway. 90A is only recommended for heavy track use, or drivers who want very limited drivetrain movement or high response and feedback while driving.
See FAQ for more info on polyurethane hardness selection!
